torsdag den 21. februar 2013

Hooking up a microcontroller to the AVR Dragon

The AVR Dragon is a development board for Atmel micro-controllers, used in conjunction with Atmel's AVR Studio.

In using this board it's not only necessary to add a micro-controller to the board, but this micro-controller must also be hooked up to the board's connectors (one is expected to solder pins to the board's through-holes) or the AVR Studio will not be able to see the micro-controller.

These are the connections that must be made with jumper wires:



I recommend Derek Molloy's terrific video on the subject.



Ingen kommentarer:

Tilføj en kommentar